Montana MTN PRO Indoor Protective Varnish 400ml - Glossy

Montana MTN PRO Interior Gloss 400ml is a water-based varnish spray of great quality and durability, which does not yellow and dries quickly. With a quantity of 400ml, you will have enough to varnish a complete painting.

Remember to leave at least 30 minutes for a complete drying between coats to achieve an optimal result. Now yes, we leave you some tips for you to paint your bike with total safety and for the best possible result.

Instructions for use:

• Make sure the surface is clean and dry.
• Shake for at least 1 minute before use.
• Do not varnish in direct sunlight or spray.
• Do not apply directly on metal.
• Applicable on water-based and solvent-based acrylic paints, after drying.
• Applicable on acrylic chalky products. Compatible with MTN PRO products: RAL Colors, Metallic Paint, Vinyl Coating.
• For other types of surfaces make a previous test.
• Apply in thin coats for best results, three thin coats are always better than one thick coat.
• When spraying, keep your hand moving at all times.
• Allow to dry before adding a second coat (dry to touch: 30 min, complete dry: 12 hours).
• Before storing, turn can upside down and squeeze spray for 2 sec.
• Protect the spray can from sunlight and temperatures above 90°C.

Since its foundation in 1994, and in line with the philosophy of its founders, Montana Colors has been committed to ensuring the highest standards for all of its products to protect the environment and the health of graffiti artists.

The ability to innovate, care for a job well done, full devotion to customers and commitment to graffiti and the environment are the core values ​​of a brand that sets it apart.